A.T. Mine E.P. Mark V

From Wikipedia, the free encyclopedia
A.T mine E.P Mark V
TypeAnti-tank mine
Place of originUnited Kingdom
Service history
Used byUnited Kingdom
WarsWorld War II
Specifications
Mass12.5 lb (5.7 kg)
Height4 in (100 mm)
Diameter8 in (200 mm)

FillingTNT or Baratol
Filling weight8.25 lb (3.74 kg)

The A.T. Mine E.P. Mark V is a World War II British anti-tank mine, an improved version of previous A.T. Mine E.P.-type mines such as the A.T. Mine E.P. Mark II.[1][2][3]

Design[edit]

The mine is four inches (100mm) in height and seven inches (200mm) in diameter.[1] The mine cover, shaped like a mushroom, is attached to the mine with three pins that fit into retaining straps.[2] Similar to the A.T. Mine E.P. Mark II, when pressure is placed on the mine a plunger is sent straight down through a shear wire and crushes an ampule cartridge.[2] This causes a chemical reaction which activates the detonator.[2] The mine differs from previous models in that, instead of the detonator activating the mine itself, it triggers a booster charge which then triggers the mine.[2] To arm the mine, one must take off the cover and then place the fuse in it.[2] One then puts an ampule into the detonator and seals it, then inserts the detonator into the fuse, then seals the detonator[2] grease fuse, and then inserts the mine's central fuse well, then puts the cover back in, and it is armed.[2] To disable the mine, take off the cover with no downward pressure and then take out the fuse.[2]

See also[edit]

References[edit]

  1. ^ a b Boyd, David (1 January 2009). "British Mines of the Second World War". British Equipment of the Second World War. Retrieved 2021-01-03.
  2. ^ a b c d e f g h i "A/Tk Mine EP Mk5". www.lexpev.nl. Retrieved 2021-01-31.
  3. ^ Poulin, Olivier (2017-04-10). "WW2 Equipment Data: British Explosive Ordnance - Anti-Tank and Anti-Personnel Mines". WW2 Equipment Data. Retrieved 2021-02-01.