Oxhydroelectric effect

From Wikipedia, the free encyclopedia

The oxhydroelectric effect consists in the generation of voltage and electric current in pure liquid water, without any electrolyte, upon exposure to electromagnetic radiation in the infrared range, after creating a physical (not chemical) asymmetry in liquid water e.g. thanks to a strongly hydrophile polymer, such as Nafion.[1][2][3]

Since the publication of the first seminal research, other independent research has been published, which refer to this effect, in scientific peer reviewed, reputable journals (with impact factors higher than the median in the respective fields).[4][5][6][7][8]

The system can be described as a photovoltaic cell operating in the infrared electromagnetic range, based on liquid water instead of a semiconductor.

Theoretical model[edit]

The model proposed by Roberto Germano and his collaborators, who have first observed the effect [1][2][3] is based on the known concept of the exclusion zone. The first observations of a different behaviour of water molecules close to the walls of its container date back to late ‘60s and early ‘70s, when Drost-Hansen, upon reviewing many experimental articles, came to the conclusion that interfacial water shows structural difference with respect to the bulk liquid water.[9][10]

In 2006 Gerald Pollack published a seminal work on the exclusion zone [11] and those observations were subsequently reported by several other groups,[12][13] in which a hydrophilic material creates a coherent water region at the boundary between its surface and the water.

Further elaborating on the work of Pollack, the model describes liquid water as a system made of two phases: a matrix of non-coherent water molecules hosting many “Coherence Domains” (CDs), about 0.1 um in size, found in the exclusion zone, but also in the bulk volume. In this model the behaviour of the coherence domains is also considered as the cause for the formation of xerosydryle.

The two phases, are characterized by different thermodynamic parameters, and are in a stable non-equilibrium state.

The coherent phase should be described by a quantum state, and in particular a state oscillating between a fundamental state, where electrons are firmly bound (ionization energy of 12.60 eV), and an excited state characterized by a quasi-free electron configuration. The energy of the excited state is 12.06 eV, which means that only a small amount of energy as small as (12.60 - 12.06) eV = 0.54 eV (Infrared range) is sufficient to extract an electron.

Then, at a fixed temperature and for molecules density exceeding a threshold, the transition of the non-coherent water molecules to the coherence state is spontaneous because it is driving the system to a lower energy configuration. More exactly, the almost free electrons have to cross an energy barrier of (0.54 - Χ) eV, where Χ ~ 0.1 eV is the electric potential difference at the CD boundary with the non-coherent water. This small amount of energy, ~ 0.44 eV, necessary for the electron extraction, makes the coherent water a reservoir of quasi-free electrons that can be easily released by Infrared stimulation, or quantum tunnel effect or by small external perturbation.

The two water phases, with their different potentials behave as the two components of a photovoltaic cell based on semiconductors. Then, in the cell described in the patent,[3] one of the two sectors has sheets of hydrophilic material, which create (more) coherent domains in that sector, with respect to the other sector.

Notes[edit]

  1. ^ a b Germano; Tontodonato; Hison; Cirillo; Tuccinardi (2012). "Oxhydroelectric Effect: Electricity from Water by Twin Electrodes". Key Engineering Materials. 495: 100–103.
  2. ^ a b V. Elia, R. Germano; C. Hison, E. Del Giudice (2013). "Oxhydroelectric Effect in bi-distilled water". Key Engineering Materials. 543: 455–459. doi:10.4028/www.scientific.net/KEM.543.455. S2CID 94391774.
  3. ^ a b c Italy ITRM20120223A1, Vittorio Elia & Roberto Germano, "Procedure and apparatus for the extraction of electricity from water", published 2013-11-18, issued 2012-05-17 
  4. ^ Ho, Mae-Wan (2014). "Illuminating Water and Life". Entropy. 16: 4874–4891.
  5. ^ Musumeci; Pollack (2014). "High electrical permittivity of ultrapure water at the water–platinum interface". Chemical Physics Letters. 613: 19–23.
  6. ^ Jiang; Liu; Amos Yinnon; Kong (2017). "Effects of Interfaces on Dynamics in Micro-Fluidic Devices: Slip-Boundaries' Impact on Rotation Characteristics of Polar Liquid Film Motors". Commun. Theor. Phys. 67: 577–589.
  7. ^ Jerman; Ogrizek; Periček Krapež; Jan (2023). "Physicochemical Study of the Molecular Signal Transfer of Ultra-High Diluted Antibodies to Interferon-Gamma". International Journal of Molecular Sciences. 24: 11961.
  8. ^ Madl; Renati (2023). "Quantum Electrodynamics Coherence and Hormesis: Foundations of Quantum Biology". International Journal of Molecular Sciences. 24: 14003.
  9. ^ W. Drost-Hansen (1969). "Structure of Water Near Solid Interfaces". Ind. Eng. Chem. 61 (11): 10–47. doi:10.1021/ie50719a005.
  10. ^ W. Drost-Hansen (1973). "Phase transitions in biological systems: Manifestations of cooperative processes in vicinal water". Ann. N. Y. Acad. Sci. 204 (1): 100–112. Bibcode:1973NYASA.204..100D. doi:10.1111/j.1749-6632.1973.tb30773.x. PMID 4513148. S2CID 35243683.
  11. ^ G.H. Pollack, J.M. Zheng; E. Khijniak, W.C. Chin (2006). "Surfaces and interfacial water: Evidence that hydrophilic surfaces have long-range impact". Advances in Colloid and Interface Science. 127 (1): 19–27. doi:10.1016/j.cis.2006.07.002. PMID 16952332.
  12. ^ C.M. Wu, C.S. Chen; W.C. Chin, Chung, W.-J (2011). "Force field measurements within the exclusion zone of water". Journal of Biological Physics. 38 (1): 113–120. doi:10.1007/s10867-011-9237-5. PMC 3285724. PMID 23277674.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  13. ^ Iván, K., Huszár, I.; Kellermayer, M., Mártonfalvi, Z. (2014). "Exclusion-Zone Dynamics Explored with Microfluidics and Optical Tweezers". Entropy. 16 (8): 4322–4337. Bibcode:2014Entrp..16.4322H. doi:10.3390/e16084322.{{cite journal}}: CS1 maint: multiple names: authors list (link)