Bless you kind souls at CTC UK who creating the rear shifting cable pull ratio page. It seems, despite all the other irrational things that happen in this world, by a stroke of luck Campagnolo 10 Speed Ergo levers such as the ones I own will shift 8 speeds using a normal Shimano rear derailleur (I do have a pretty sweet all metal RSX 8v) and a SRAM/Shimano 8 speed spaced cassette, no fancy cable routing is required. According to the table the normal 8 speed ratio is 4.8mm per shift, using Campy 10 it’s 4.79. I’ve read a forum with readers in the UK who said it works fine. The God’s must be crazy. And that means I’m leaning towards an 11-28 SRAM ocho estrellas. Okay. Now, is it 44/32 or 46/34 up front? Decisions, decisions. I realized for the sake of chainline on a 130mm rear triangle I shouldn’t run a mountain triple, as I was briefly considering a set of vintage XTR 952 cranks that looked pretty sweet in a triple configuration. Also with the triple I could just keep the 12-21 cassette that’s on there. I don’t know what this would’ve done to my chainline, but I imagine it wouldn’t have been good.